FabSwingers.com forum: Chastity cages

By (user no longer on site) OP
over a year ago

Looking for some advice.

We ve tried a could have cages. Either the ring is too small or the cage itself is too small.

We get the a little discomfort is par for the course. But either option cause too much discomfort without comfortably beating able to wear it for a good amount of time.

Any tips or hints we should be aware of please or advise?

Thanks I’m advance xx

Reply privately

Reply in forum

Reply +quote

By *avingabreakMan
over a year ago

Near the Border

Hi, getting the ring size is key in my view if your planning to wear this for 4 to 8 hrs....or longer.

I've noticed in one of your photos your wearing a ring, is that s comfortable fit?

If so, use that diameter to size and shop on line for a cage with that diameter.

Re fitting into a cage, more difficult and I think your going to have to use your best judgement on that one.

If you use a metel wire cage, there is some "growth" by the cock spilling out of the wires , so an option.

Good luck

Reply privately

Reply in forum

Reply +quote

By (user no longer on site) OP
over a year ago

"Hi, getting the ring size is key in my view if your planning to wear this for 4 to 8 hrs....or longer.

I've noticed in one of your photos your wearing a ring, is that s comfortable fit?

If so, use that diameter to size and shop on line for a cage with that diameter.

Re fitting into a cage, more difficult and I think your going to have to use your best judgement on that one.

If you use a metel wire cage, there is some "growth" by the cock spilling out of the wires , so an option.

Good luck "

We ve found the ring size that suits. It’s just the cage size that’s not quite right. Or it could just be putting it on. I can’t seem to get it to fit properly, I can’t get far enough into it, despite having a lot left to close in. I Duno if I need the caged to be wider to allow it to fit correctly.

The newest one we bought was perfect on ring size, after measuring the ring we use regularly. But the cage size was the biggest of the ones available.

We’re interested in the hole scenario, just struggling to find the right fit for the cage.

Reply privately

Reply in forum

Reply +quote

By *erkyPerditaCouple
over a year ago

fareham

With chastity cages , trial and error is all part of the course, we have a V4 holy trainer and getting the ring around the balls is sometimes tricky, and that’s using the largest they supply, however the actual cage is probably a little too big.

Be prepared to spend a lot of money finding one that is exactly what you need

Reply privately

Reply in forum

Reply +quote

By *erkyPerditaCouple
over a year ago

fareham

Just looking at your photos it could well be that you’re just too thick to fit in a cage, penis looks quite girthy so that could be a problem, and obviously being as flaccid as possible is a must when putting it on

Reply privately

Reply in forum

Reply +quote

By *iberius61Man
over a year ago

Pontefract

"Be prepared to spend a lot of money finding one that is exactly what you need "

Sounds like saddles on a race bike, everyone asks for recommendations, but it's entirely personal, wouldn't mind but they aren't cheap

Reply privately

Reply in forum

Reply +quote

By (user no longer on site) OP
over a year ago

"Just looking at your photos it could well be that you’re just too thick to fit in a cage, penis looks quite girthy so that could be a problem, and obviously being as flaccid as possible is a must when putting it on"

Thank you for the compliment first of all.

But I do agree that seems to be the issue. It’s hard to tell from photos online when buying. And the place we last bought from we chose the correct ring size with the largest cage.

We have another one where the cages is ok but the ring too small. But the don’t fit each other. Xx

Reply privately

Reply in forum

Reply +quote

By (user no longer on site) OP
over a year ago

"Be prepared to spend a lot of money finding one that is exactly what you need

Sounds like saddles on a race bike, everyone asks for recommendations, but it's entirely personal, wouldn't mind but they aren't cheap

I ve never tried using a saddle

By the sound of it it’s trial and error

Reply privately

Reply in forum

Reply +quote

By (user no longer on site)
over a year ago

"Be prepared to spend a lot of money finding one that is exactly what you need

Sounds like saddles on a race bike, everyone asks for recommendations, but it's entirely personal, wouldn't mind but they aren't cheap

I ve never tried using a saddle

By the sound of it it’s trial and error "

For long term wear a metal cage is needed and it takes a while for the skin around the balls to thicken to allow 24/7 wear but that’s part of the transformation of being in chastity

Reply privately

Reply in forum

Reply +quote

By *avingabreakMan
over a year ago

Near the Border

OK, if its the cage. If you are willing to travel to Blackpool, Saints and Sinners have a metal kink basement.

You can view the toys but I doubt if you can try but if you went with measurements, I'm sure the ladies would help measure their cages up for a best fit. Not cheap but your seeing before you buy.

Reply privately

Reply in forum

Reply +quote

By (user no longer on site) OP
over a year ago

"OK, if its the cage. If you are willing to travel to Blackpool, Saints and Sinners have a metal kink basement.

You can view the toys but I doubt if you can try but if you went with measurements, I'm sure the ladies would help measure their cages up for a best fit. Not cheap but your seeing before you buy.

Thank you. It is a bit of a way from us. But worth thinking about if we’re up that way.

Reply privately

Reply in forum

Reply +quote

By *oxy jWoman
over a year ago

somerset

90% of cages are made in china where penis's and balls are smaller thats a problem ...also some men dont have hanging balls thats a problem too ... when we first went the cuckold route we found nothing fitted especially the rings so we brought a dremal tool and did self adjustments ..

there are uk sellers now doing a 52 and 54 ring now on metal ones they are much better i think they are on esty but once you find one to fit give it 6 months and you will go smaller

Reply privately

Reply in forum

Reply +quote

By *oiluvfunMan
over a year ago

Penrith

Thank you for the compliment first of all.

But I do agree that seems to be the issue. It’s hard to tell from photos online when buying. And the place we last bought from we chose the correct ring size with the largest cage.

We have another one where the cages is ok but the ring too small. But the don’t fit each other. Xx"

Because this is a new idea for you, it could be that you are ‘excited’ as you are trying them on? Try using a bag of frozen peas on your cock and balls to quash any ‘stirrings’…..

Reply privately

Reply in forum

Reply +quote

By *erkyPerditaCouple
over a year ago

fareham

"90% of cages are made in china where penis's and balls are smaller thats a problem ...also some men dont have hanging balls thats a problem too ... when we first went the cuckold route we found nothing fitted especially the rings so we brought a dremal tool and did self adjustments ..

there are uk sellers now doing a 52 and 54 ring now on metal ones they are much better i think they are on esty but once you find one to fit give it 6 months and you will go smaller "

This answer is everything , spot on

Reply privately

Reply in forum

Reply +quote

By *ackieSteveCouple
over a year ago

Newbridge

Kink3d designs on the app of the little blue tweeting bird are great. They helped me size steves perfectly and he can now wear it 24/7 365 totally fine.

They make the cobra cages.

Reply privately

Reply in forum

Reply +quote

By *vanabeusedTV/TS
over a year ago

somewhere

Just bought a new one today and had it on all day and love it . Look at house of denial and maybe get a metal one with a hinge as they are easier to get on ? Ps …….. lucky him to have you as a key holder

Reply privately

Reply in forum

Reply +quote

Post new Message to Thread