FabSwingers.com forum: pearcings

By *icknpussy1000 OP Couple
over a year ago

birmingham

Do any one know anything about Prince Albert pearcings I had it done about a year ago I upsized from 2 mm thick to 3 mm thick with no problems but I cannot get a 4 mm one to go through at all tried lube with no luck any one know how to get it to go through?

By (user no longer on site)
over a year ago

give it a good shove

By (user no longer on site)
over a year ago

"Do any one know anything about Prince Albert pearcings I had it done about a year ago I upsized from 2 mm thick to 3 mm thick with no problems but I cannot get a 4 mm one to go through at all tried lube with no luck any one know how to get it to go through?"

give it a good blow!

By *icknpussy1000 OP Couple
over a year ago

birmingham

"give it a good shove

Tried it

By (user no longer on site)
over a year ago

"give it a good shove

Ouch!

By *tevie-36Man
over a year ago

Birmingham

Hi dick, I have a 3mm also, I haven't tried going further yet, but I belive you can get things called tapers to stretch the hole, maybe PM me and we can compare a bit more.

By (user no longer on site)
over a year ago

Try using a tapered insertion pin in either steel or acrylic. These can be bought in sets on ebay. The plastic ones are quite cheap and some go up to 10 or 12mm. Gently try sliding one through the existing hole a few times before you insert the larger jewellery. Bit of ky jelly on the pin to ease it through then follow the pin through with the new ring and Robert's your mothers brother