FabSwingers.com mobile

Join us FREE, we're FREE to use

Web's largest swingers site since 2006.

Already registered?
Login here

Back to forum list
Back to The Lounge

tradesmans advice please

Jump to newest
 

By *oodmess OP   Man
over a year ago

yumsville

Can anybody tell me how you screw top hung vertical blinds into a steel rsj? They are to cover bi fold doors.

Would self taping screws do the job or would you have to drill first or potentially add a batten?

Its either £200+ with fitting or an easy £90 for the blinds alone.

Thanks

Reply privatelyReply in forumReply +quote
 

By *ackandkateCouple
over a year ago

Truro

You'll need to drill into the RSJ first. They are normaly just mild steel, so a standard HSS drill bit will do it.

Is the steelwork cladded in or can you get to it? If you can get to it, just drill through and put a nut and bolt in.

If it's cladded you will need to tap the hole and then screw a bolt into it.

Reply privatelyReply in forumReply +quote
 

By *ittle_brat_evie!!Woman
over a year ago

evesham

what jack said

Reply privatelyReply in forumReply +quote
 

By (user no longer on site)
over a year ago

When it comes to screwing the wife prefers well hung but wouldnt pay £200 even if he was blind, i think the £90 is better but seems a lot if ive got to do it myself

Reply privatelyReply in forumReply +quote
 

By *oodmess OP   Man
over a year ago

yumsville

The steel looks like an I ... It is above the bi folds spring the exterior wall and is plastered over.

If it is drilled what kind if screws do you use then..

cheers again

Reply privatelyReply in forumReply +quote
 

By *oodmess OP   Man
over a year ago

yumsville

It is above the bi folds, supporting the exterior wall

That was supposed to say

Reply privatelyReply in forumReply +quote
 

By *ackandkateCouple
over a year ago

Truro

If you can see the steel, ie, you can touch it freely, just drill a 6mm dia hole through it with a good HSS drill bit and use a 5mm dia nut and bolt. You won't be able to use self tappers on an I beam.

Reply privatelyReply in forumReply +quote
 

By *rT30Man
over a year ago

Munster


"If you can see the steel, ie, you can touch it freely, just drill a 6mm dia hole through it with a good HSS drill bit and use a 5mm dia nut and bolt. You won't be able to use self tappers on an I beam."

Reply privatelyReply in forumReply +quote
 

By *ranny-CrumpetWoman
over a year ago

The Town by The Cross


"Can anybody tell me how you screw top hung vertical blinds into a steel rsj? They are to cover bi fold doors.

Would self taping screws do the job or would you have to drill first or potentially add a batten?

Its either £200+ with fitting or an easy £90 for the blinds alone.

Thanks"

The only words I can make out are:-

Screw , Hung, Bi, Taping , Drill , fitting,

Reply privatelyReply in forumReply +quote
 

By *ickndomCouple
over a year ago

Wimborne

Is it an RSJ or a modern lintal (catnic) which is much easier to drill, the best idea is to do a small piolet hole and see how easy it is to drill, if its a catnic then you can use plasterboard screws, other wise i'd drill it over size and raw plug it

You could just stick it on with Sikaflex, just don't plan to remove them afterwards

Reply privatelyReply in forumReply +quote
 

By *oodmess OP   Man
over a year ago

yumsville

Its an I beam on an exterior load bearing wall.

Hss drill bit seems to be needed, I was hoping self tappers would be the only thing needed... I'm not exactly fluent with diy sorry

Reply privatelyReply in forumReply +quote
 

By *oodmess OP   Man
over a year ago

yumsville


"Can anybody tell me how you screw top hung vertical blinds into a steel rsj? They are to cover bi fold doors.

Would self taping screws do the job or would you have to drill first or potentially add a batten?

Its either £200+ with fitting or an easy £90 for the blinds alone.

Thanks

The only words I can make out are:-

Screw , Hung, Bi, Taping , Drill , fitting,

"

I couldn't pass myself off as a handyman very easily lol

Reply privatelyReply in forumReply +quote
 

By (user no longer on site)
over a year ago


"If you can see the steel, ie, you can touch it freely, just drill a 6mm dia hole through it with a good HSS drill bit and use a 5mm dia nut and bolt. You won't be able to use self tappers on an I beam."
Sounds like the house that jack built...

Reply privatelyReply in forumReply +quote
 

By *B9 QueenWoman
over a year ago

Over the rainbow, under the bridge

The steel is in an exterior, load-bearing wall where a 7ft bi-fold has been fitted. The steel is already plastered and painted so there is no access to it for using a nut and bolt. The vertical blinds are to hang under the steel, into the recess. The question is how to do it.

Reply privatelyReply in forumReply +quote
 

By (user no longer on site)
over a year ago


"The steel is in an exterior, load-bearing wall where a 7ft bi-fold has been fitted. The steel is already plastered and painted so there is no access to it for using a nut and bolt. The vertical blinds are to hang under the steel, into the recess. The question is how to do it."

Fix a piece of wood using no more nails paint it white and it will. Look good, if you have trouble getting it to stay up channel some plaster out the sides and then slip it in using filler to tidy up all the edges if you

Or use piece of wood the exact same size and paint or wallpaper over it looks like a wall then

Difficult to explain in words easier to do in practice

Reply privatelyReply in forumReply +quote
 

By *oasterCockbumMan
over a year ago

Highway 61

HSS Drill and tap ... M4 size ish ... use shakeproof and compression washers and you wont need access to fit a nut .. it'll be so solid ye cood hing a hump swing oaf it .... hope helps

Reply privatelyReply in forumReply +quote
 

By *oodmess OP   Man
over a year ago

yumsville

Thanks, I think screw fix will be able to help with all that and advise a little too

Reply privatelyReply in forumReply +quote
 

By (user no longer on site)
over a year ago

dont know if youtube 'how to' videos might help

Reply privatelyReply in forumReply +quote
 
 

By (user no longer on site)
over a year ago

I can't be the only one who thought this was about anal.......can I?

Reply privatelyReply in forumReply +quote
Post new Message to Thread
back to top